Photo Gallery
Photo Gallery
Photo Gallery
Photo Gallery
Photo Gallery
Photo Gallery
Photo Gallery
Wednesday,24 October 2018 / 10:11:09 WIB

ANTIFOAM-SPT (FS 150-B)

DESCRITION

 

ANTIFOAM-SPT is non silicon water based defoamer which offers superior deaeration, drainage and cost effectiveness over many conventional water based defoamers. The fluid nature of ANTIFOAM-SPT permits application by conventional methods or by spraying onto the wire.

 

PHYSICAL PROPERTIES

 

Appearance                             : Fluid white emulsion

Specific Gravity (250C)            : 0.95 – 1.00

pH (as is)                               : 6.0 – 8.0

Viscosity 250C (cps)                : < 300 cps

Solubility                              : Dispersible in water

APPLICATION METHODE AND RATES

ANTIFOAM-SPT can be applied neat or as 1-2% dilution in water. ANTIFOAM-SPT is readily diluted by water and normally in affected by water hardness. ANTIFOAM-SPT results in cleaner defoamer make down system and reduce deposit. It is also an excellent effluent defoamer.

PACKAGING, STORAGE AND HANDLING

ANTIFOAM-SPT is shipped in 30 kg jerican or 200 kg lined open head drums. Since low temperature will cause this defoamer to freeze, storage in a warm place (>100C) is recommended. If freezing occurs, allow to warm to room temperature and mix well before using.

ANTIFOAM-SPT isreadily pump able and is shear stable. Any positive displacement pump should be adequate for use with ANTIFOAM-SPT.

Because ANTIFOAM-SPT contains a significant volume of water, storage and transfer equipment should be adequately corrosion resistant.


Produk Lainnya
0 Komentar :


Isi Komentar :
Nama :
Website :
Komentar
 
 (Masukkan 6 kode diatas)