Sunday,18 November 2018 / 23:19:30 WIB
ENDFOAM – FA 50 WATER BASED DEFOAMER
Produk Lainnya
Isi Komentar :
ENDFOAM – FA 50 WATER BASED DEFOAMER
Endfoam FA-50 ( Fatty Alkohol Base defoamer ) which offers superior deaeration, drainage and cost effectiveness over many conventional water based defoamers. The fluid nature of Endfoam – FA 50 permits application by conventional methods or by spraying onto the wire.
TYPYCAL PROPERTIES
Appearance : Fluid white emulsion
Specific Gravity : 0.95 – 1.00
pH (as is) : 5,0 – 9,0
Viscosity, 25oC : <300cps
Solubility : Dispersible in water
APPLICATION
End foam FA-50 can be applied neat or as a 1-2% dilution in water. End Foam FA 50 is readily diluted by water and normally inaffected by water hardness, result in cleaner defoamer make down system and reduced deposit. End Foam FA-50 is also an excellent effluent defoamer.
PACKAGING, STORAGE AND HANDLING
End Foam FA-50 is shipped in 30 kg jerican or 200 kg lined open head drums. Since low temperature will cause this defoamer to freeze, storage in a warm place (>10oC) is recommended. If freezing occurs, allow to warm to room temperature and mix well before using.
End Foam FA-50 is readily pump able and is shear stable. Any positive displacement pump should be adequate for use .
Because End Foam FA-50 contains a significant volume of water, storage and transfer equipment should be adequately corrosion resistant.
Produk Lainnya
- ANTISCALANT FOR RO
- Influent and Effluent Water Treatment
- Cooling Water Treatment
- Boiler Water Treatment
- ANTIDUST POLYMER
Isi Komentar :
